| Model No | GIGABYTE AORUS X670 AORUS ELITE AX DDR5 AMD Ryzen Socket AM5  PCle 5.0 Gaming MotherBoard | 
| Part No | X670 A0RUS ELITE AX | 
| Chipset | AMD X670 | 
| Form Factor | ATX Form Factor; 30.5cm x 24.4cm | 
| CPU | AMD Socket AM5, support for: AMD Ryzenâ„¢ 7000 Series Processors | 
| Wireless & Bluetooth | AMD Wi-Fi 6E RZ616 (MT7922A22M) WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
 BLUETOOTH 5.2
 Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
 (Actual data rate may vary depending on environment and equipment.)
 | 
| Memroy Type | DDR5 | 
| Memory Compatibility | Support for DDR5 6400(OC)/6200(OC)/6000(OC)/5600(OC)/5200/4800/4400 MT/s memory modules 4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
 Dual channel memory architecture
 Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
 Support for AMD EXtended Profiles for Overclocking (AMD EXPOâ„¢) and Extreme Memory Profile (XMP) memory modules
 | 
| Storage Compatibility | CPU: 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0(Note) x4/x2 SSD support) (M2A_CPU)
 (Note) Actual support may vary by CPU.
 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2B_CPU)
 Chipset:
 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2C_SB, M2D_SB)
 4 x SATA 6Gb/s connectors
 RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices
 RAID 0, RAID 1, and RAID 10 support for SATA storage devices
 | 
| Graphics | Integrated Graphics Processor: 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
 * Support for HDMI 2.1 version and HDCP 2.3.
 ** Support native HDMI 2.1 TMDS compatible ports.
 | 
| Back Panel I/O Ports | 1 x Q-Flash Plus button 2 x SMA antenna connectors (2T2R)
 1 x HDMI port
 6 x USB 3.2 Gen 1 ports
 4 x USB 2.0/1.1 ports
 2 x USB 3.2 Gen 2 Type-A ports (red)
 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support
 1 x RJ-45 port
 3 x audio jacks
 | 
| I/O Controller | iTE® I/O Controller Chip | 
| USB Ports | CPU: 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
 2 x USB 3.2 Gen 1 ports on the back panel
 CPU + USB 2.0 Hub:
 4 x USB 2.0/1.1 ports on the back panel
 Chipset:
 2 x USB Type-C® ports, with USB 3.2 Gen 2×2 support (1 port on the back panel, 1 port available through the internal USB header)
 8 x USB 3.2 Gen 1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
 4 x USB 2.0/1.1 ports available through the internal USB headers
 | 
| Expansion Slots | CPU: 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16 (PCIEX16)
 * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
 Chipset:
 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4)
 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x2 (PCIEX2)
 Support for AMD CrossFireâ„¢ technology (PCIEX16 and PCIEX4)
 | 
| LAN | Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) | 
| Audio | Realtek® Audio CODEC High Definition Audio
 2/4/5.1/7.1-channel
 * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
 | 
| Internal I/O Connectors | 1 x 24-pin ATX main power connector 2 x 8-pin ATX 12V power connectors
 1 x CPU fan header
 1 x water cooling CPU fan header
 3 x system fan headers
 1 x CPU cooler LED strip/RGB LED strip header
 2 x addressable LED strip headers
 2 x RGB LED strip headers
 4 x SATA 6Gb/s connectors
 4 x M.2 Socket 3 connectors
 1 x front panel header
 1 x front panel audio header
 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support
 2 x USB 3.2 Gen 1 headers
 2 x USB 2.0/1.1 headers
 1 x THB_U4 add-in card connector
 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
 1 x power button
 1 x reset button
 1 x Clear CMOS button
 1 x reset jumper
 1 x Clear CMOS jumper
 | 
| Special Features | Support for GIGABYTE Control Center (GCC) * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
 Support for Q-Flash
 Support for Q-Flash Plus
 Support for Smart Backup
 | 
| BIOS | 1 x 256 Mbit flash Use of licensed AMI UEFI BIOS
 PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
 | 
| H/W Monitoring | Voltage detection Temperature detection
 Fan speed detection
 Water cooling flow rate detection
 Fan fail warning
 Fan speed control
 * Whether the fan speed control function is supported will depend on the fan you install.
 | 
| Operating System | Support for Windows 11 64-bit Support for Windows 10 64-bit
 | 
 
Reviews
Clear filtersThere are no reviews yet.